Quality & certification
A pipe either passes the test or it does not — there is no third answer. This page shows where the checks happen, what is recorded, and which documents leave the factory with the container.
Five gates before
the container closes
Incoming material
Density, MFI, carbon black, moisture and thermal stability on every compound batch.
In-process
Wall thickness, OD and ovality sampled at fixed intervals; parameters logged per run.
Finished product
Hydrostatic test, drop impact, Vicat softening and dimensional check against the standard.
Pre-shipment
Quantity, marking, packing and loading plan verified before the truck leaves the yard.
What ships with the pipe
Every consignment leaves with the paperwork a customs broker and a site engineer both ask for. The test report is issued against the standard on your order, not a generic one.
| Standard | Scope | Document issued per order |
|---|---|---|
| ISO 9001 | Quality management system of the producing plant | Mill certificate |
| EN 1452 / ISO 1452 | PVC-U pressure systems for water | Dimensional + hydrostatic test report |
| ASTM D1785 / F441 | PVC-U Sch 40 / 80 · CPVC Sch 80 | Dimensional + test report |
| ISO 15874 / DIN 8077 | PP-R hot & cold water systems | Test report |
| ISO 4427 / EN 12201 | PE 100 water supply | Test report |
| CJ/T 445 | PVC-O 500 grade, DN 90–630 | Test report |
| Export set | Every shipment | Packing list · invoice · CO / Form E |
What sits in the lab
The equipment list is short and specific. If a test cannot be run in house, it goes to a third-party lab and the report is quoted in the offer.
- HydrostaticLong-term pressure test rig, 20 – 95 °C
- ImpactDrop weight tester, 0 °C and 23 °C conditioning
- ThermalVicat softening point, dimensional stability at 150 °C
- MaterialDensity, MFI, carbon black content, moisture analyser
How it arrives
matters as much
Pipe is cheap to make and expensive to replace. Packing is specified per diameter, per container and per destination climate.
Bundles
Strapping at fixed spacing for small and medium diameters; load plan issued per container size.
Neutral or branded
Plain packing for traders, buyer-branded printing for distributors. Marking agreed on the PI.
UV protection
Wrapping for above-ground storage in high-insolation destinations.
Loading photos
Container interior photographed before closing, sent with the shipping documents.
Need a test report
before you order?
Tell us the standard and the diameter — we send the current batch report, not a marketing brochure.