Product system
Four PVC compounds, two polyolefin families, one accessories range and one custom line. The four compounds are the reason this catalogue is split the way it is: same polymer base, four different answers to pressure, heat and impact.
Four compounds,
four different pipes

The workhorse
Buried water, sewer and irrigation. Stiffest of the four, cheapest per metre, and the joint every crew already knows how to make.

Half the wall, same rating
Stretched cold in both directions so the chains line up. 53–60 % thinner wall than PVC-U at the same duty, with a bore you can sometimes trade for a size.

The one that survives the trench
Impact modifiers trade a little stiffness for toughness — rock bedding, rough handling and a backfill that arrived faster than the inspection.

Past the softening point
Extra chlorine lifts the service ceiling to 95 °C and holds off hypochlorite and chlorine solutions that eat ordinary PVC-U.
PVC-U pressure
& drainage
Rigid, chemically resistant, dimensionally stable. Our widest range and the one with the most stock sizes behind it.
- RangeDN 20 – 450, PN 6.3 / 8 / 10 / 12.5 / 16 / 20
- StandardGB/T 10002.1 · ISO 1452 · EN 1452 · ASTM D1785
- JointingSolvent cement, rubber-ring socket, threaded and flanged transitions
- Length4 m per piece, custom lengths on request
PVC-M impact
modified
The same pressure classes as PVC-U with a tougher wall. Specified where the pipe will be handled badly and buried in something that is not sand.
- RangeDN 20 – 450, PN 6.3 / 8 / 10 / 12.5 / 16 / 20
- StandardGB/T 10002.1 · ISO 1452
- Choose it whenRocky bedding, mountain trench, road transport over long distance, site handling by hand
- Trade-offSlightly lower ring stiffness than PVC-U of the same pressure class
PVC-O biaxially
oriented
For transmission mains where weight, bore and impact strength all count at once. A 6 m length of DN 400 at PN 16 weighs roughly half what the PVC-U equivalent does, which changes what a truck can carry.
- RangeDN 90 – 630, PN 10 / 12.5 / 16 / 20 / 25
- StandardCJ/T 445-2014 grade 500 · ISO 16422
- JointingIntegral rubber-ring socket, flanged transitions
- NoteLower ring stiffness — bedding and surround carry more of the load than with PVC-U
PVC-C / CPVC
hot & chemical
Hot water, chlorine dosing and cable ducting. The compound that keeps a thermoplastic pipe in service where PVC-U would soften, swell or fail.
- Range1/2″ – 4″ Schedule 80, larger sizes to order
- StandardASTM F441
- ServiceHot water to 95 °C, hypochlorite, dilute acids and alkalis, power cable duct
- JointingCPVC solvent cement, threaded (SCH 80 wall), flanged
PPR and PE 100

Hot & cold building services
Socket fusion makes the joint stronger than the wall. Dominant in building risers, and the range we keep deliberately simple: pipe, fittings, fusion tools.

Buried networks & slurry
Coils for small diameters, straight lengths for mains. Butt fusion, electrofusion or compression — the default for buried water in most export markets.
What finishes the line

Matched to every family
Equal and reducing tees, elbows, sockets, caps, adaptors, transition pieces (PVC–metal, PE–metal) and repair couplers.
End connections included
Ball, butterfly, gate, check, unions and strainers in PVC-U, PPR and PE bodies, supplied with the matching socket, threaded or flanged ends.

Fabricated to drawing
One-piece bends, D-section and perforated pipe, large-bore reducers, machined parts. Buyer branding, custom colour and non-standard lengths.
Not sure which
compound you need?
Send the medium, the flow, the pressure, the temperature and the installation method. We will propose the compound and the pressure class, then price it.