Overview
PVC-U is the default material for cold water and gravity drainage: high tensile strength, good chemical resistance, low friction loss and a joint that is chemically welded rather than mechanically sealed.
Dimensions below are the current production range, quoted against GB/T 10002.1. Equivalent sizes in ASTM D1785 SCH 40 / SCH 80 and EN 1452 carry different wall thickness for the same nominal bore — see the dimension chart before you specify.
Dimensions & pressure class
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 63 | 2.0 | 4 |
| 75 | 2.3 | 4 |
| 90 | 2.8 | 4 |
| 110 | 2.7 | 4 |
| 125 | 3.1 | 4 |
| 140 | 3.5 | 4 |
| 160 | 4.0 | 4 |
| 180 | 4.4 | 4 |
| 200 | 4.9 | 4 |
| 225 | 5.5 | 4 |
| 250 | 6.2 | 4 |
| 280 | 6.9 | 4 |
| 315 | 7.7 | 4 |
| 355 | 8.7 | 4 |
| 400 | 9.8 | 4 |
| 450 | 11.0 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 50 | 2.0 | 4 |
| 63 | 2.5 | 4 |
| 75 | 2.9 | 4 |
| 90 | 3.5 | 4 |
| 110 | 3.4 | 4 |
| 125 | 3.9 | 4 |
| 140 | 4.3 | 4 |
| 160 | 4.9 | 4 |
| 180 | 5.5 | 4 |
| 200 | 6.2 | 4 |
| 225 | 6.9 | 4 |
| 250 | 7.7 | 4 |
| 280 | 8.6 | 4 |
| 315 | 9.7 | 4 |
| 355 | 10.9 | 4 |
| 400 | 12.3 | 4 |
| 450 | 13.8 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 40 | 2.0 | 4 |
| 50 | 2.4 | 4 |
| 63 | 3.0 | 4 |
| 75 | 3.6 | 4 |
| 90 | 4.3 | 4 |
| 110 | 4.2 | 4 |
| 125 | 4.8 | 4 |
| 140 | 5.4 | 4 |
| 160 | 6.2 | 4 |
| 180 | 6.9 | 4 |
| 200 | 7.7 | 4 |
| 225 | 8.6 | 4 |
| 250 | 9.6 | 4 |
| 280 | 10.7 | 4 |
| 315 | 12.1 | 4 |
| 355 | 13.6 | 4 |
| 400 | 15.3 | 4 |
| 450 | 17.2 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 32 | 2.0 | 4 |
| 40 | 2.4 | 4 |
| 50 | 3.0 | 4 |
| 63 | 3.8 | 4 |
| 75 | 4.5 | 4 |
| 90 | 5.4 | 4 |
| 110 | 5.3 | 4 |
| 125 | 6.0 | 4 |
| 140 | 6.7 | 4 |
| 160 | 7.7 | 4 |
| 180 | 8.6 | 4 |
| 200 | 9.6 | 4 |
| 225 | 10.8 | 4 |
| 250 | 11.9 | 4 |
| 280 | 13.4 | 4 |
| 315 | 15.0 | 4 |
| 355 | 16.9 | 4 |
| 400 | 19.1 | 4 |
| 450 | 21.5 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 25 | 2.0 | 4 |
| 32 | 2.4 | 4 |
| 40 | 3.0 | 4 |
| 50 | 3.7 | 4 |
| 63 | 4.7 | 4 |
| 75 | 5.6 | 4 |
| 90 | 6.7 | 4 |
| 110 | 6.6 | 4 |
| 125 | 7.4 | 4 |
| 140 | 8.3 | 4 |
| 160 | 9.5 | 4 |
| 180 | 10.7 | 4 |
| 200 | 11.9 | 4 |
| 225 | 13.4 | 4 |
| 250 | 14.8 | 4 |
| 280 | 16.6 | 4 |
| 315 | 18.7 | 4 |
| 355 | 21.1 | 4 |
| 400 | 23.7 | 4 |
| 450 | 26.7 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 20 | 2.0 | 4 |
| 25 | 2.3 | 4 |
| 32 | 2.9 | 4 |
| 40 | 3.7 | 4 |
| 50 | 4.6 | 4 |
| 63 | 5.8 | 4 |
| 75 | 6.9 | 4 |
| 90 | 8.2 | 4 |
| 110 | 8.1 | 4 |
| 125 | 9.2 | 4 |
| 140 | 10.3 | 4 |
| 160 | 11.8 | 4 |
| 180 | 13.3 | 4 |
| 200 | 14.7 | 4 |
| 225 | 16.6 | 4 |
| 250 | 18.4 | 4 |
| 280 | 20.6 | 4 |
| 315 | 23.2 | 4 |
| 355 | 26.1 | 4 |
| 400 | 29.4 | 4 |
| 450 | 33.1 | 4 |
Jointed ends. Plain end as standard; socket (bell) end and rubber-ring socket to order. State the end type when you enquire — it changes the nesting and therefore the container load.
Availability. Water-supply sizes are produced to order; the drainage and conduit ranges are held in stock. Mixed-size containers are accepted against a loading plan issued with the quotation.
Dimensions follow GB/T 10002.1. The same nominal sizes can be supplied to ASTM D1785 SCH 40 / SCH 80 or EN 1452 — wall thickness differs, see the dimension chart.
PVC-M — the same range, a tougher wall
The second compound we publish as produced. Pressure classes and diameters track PVC-U almost size for size; what changes is the compound, not the dimension system. Specify it when the pipe will be handled badly — rock bedding, mountain trench, long road transport.
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 90 | 2.0 | 4 |
| 110 | 2.2 | 4 |
| 125 | 2.5 | 4 |
| 140 | 2.8 | 4 |
| 160 | 3.2 | 4 |
| 180 | 3.6 | 4 |
| 200 | 3.9 | 4 |
| 225 | 4.4 | 4 |
| 250 | 4.9 | 4 |
| 280 | 5.5 | 4 |
| 315 | 6.2 | 4 |
| 355 | 7.0 | 4 |
| 400 | 7.9 | 4 |
| 450 | 8.8 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 75 | 2.0 | 4 |
| 90 | 2.2 | 4 |
| 110 | 2.7 | 4 |
| 125 | 3.1 | 4 |
| 140 | 3.5 | 4 |
| 160 | 4.0 | 4 |
| 180 | 4.4 | 4 |
| 200 | 4.9 | 4 |
| 225 | 5.5 | 4 |
| 250 | 6.2 | 4 |
| 280 | 6.9 | 4 |
| 315 | 7.7 | 4 |
| 355 | 8.7 | 4 |
| 400 | 9.8 | 4 |
| 450 | 11.0 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 63 | 2.0 | 4 |
| 75 | 2.3 | 4 |
| 90 | 2.8 | 4 |
| 110 | 3.4 | 4 |
| 125 | 3.9 | 4 |
| 140 | 4.3 | 4 |
| 160 | 4.9 | 4 |
| 180 | 5.5 | 4 |
| 200 | 6.2 | 4 |
| 225 | 6.9 | 4 |
| 250 | 7.7 | 4 |
| 280 | 8.6 | 4 |
| 315 | 9.7 | 4 |
| 355 | 10.9 | 4 |
| 400 | 12.3 | 4 |
| 450 | 13.8 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 50 | 2.0 | 4 |
| 63 | 2.5 | 4 |
| 75 | 2.9 | 4 |
| 90 | 3.5 | 4 |
| 110 | 4.2 | 4 |
| 125 | 4.8 | 4 |
| 140 | 5.4 | 4 |
| 160 | 6.2 | 4 |
| 180 | 6.9 | 4 |
| 200 | 7.7 | 4 |
| 225 | 8.6 | 4 |
| 250 | 9.6 | 4 |
| 280 | 10.7 | 4 |
| 315 | 12.1 | 4 |
| 355 | 13.6 | 4 |
| 400 | 15.3 | 4 |
| 450 | 17.2 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 40 | 2.4 | 4 |
| 50 | 3.0 | 4 |
| 63 | 3.0 | 4 |
| 75 | 3.6 | 4 |
| 90 | 4.3 | 4 |
| 110 | 5.3 | 4 |
| 125 | 6.0 | 4 |
| 140 | 6.7 | 4 |
| 160 | 7.7 | 4 |
| 180 | 8.6 | 4 |
| 200 | 9.6 | 4 |
| 225 | 10.8 | 4 |
| 250 | 11.9 | 4 |
| 280 | 13.4 | 4 |
| 315 | 15.0 | 4 |
| 355 | 16.9 | 4 |
| 400 | 19.1 | 4 |
| 450 | 21.5 | 4 |
| Outside diameter | Wall thickness | Length / piece |
|---|---|---|
| 20 | 2.0 | 4 |
| 25 | 2.0 | 4 |
| 32 | 2.0 | 4 |
| 40 | 2.4 | 4 |
| 50 | 3.0 | 4 |
| 63 | 3.8 | 4 |
| 75 | 4.5 | 4 |
| 90 | 5.4 | 4 |
| 110 | 6.6 | 4 |
| 125 | 7.4 | 4 |
| 140 | 8.3 | 4 |
| 160 | 9.5 | 4 |
| 180 | 10.7 | 4 |
| 200 | 11.9 | 4 |
| 225 | 13.4 | 4 |
| 250 | 14.8 | 4 |
| 280 | 16.6 | 4 |
| 315 | 18.7 | 4 |
| 355 | 21.1 | 4 |
| 400 | 23.7 | 4 |
PVC-M walls are thinner than PVC-U at the same nominal pressure, which buys bore but costs ring stiffness. In deep or heavily loaded trench we would rather quote PVC-U one class up than PVC-M at the limit.
Jointing methods
Solvent cement
Standard for buried and above-ground cold water. Cleaner + cement, cure time depends on diameter and ambient temperature.
Rubber ring socket
Integral socket with elastomeric seal for fast site assembly where movement and thermal expansion must be accommodated.
Threaded transition
PVC–brass or PVC–steel adaptors for connection to valves, pumps and metal pipework.
Flanged
One-piece or stub-flange connections at equipment, in the drilling nominated by the project.
Quality documents per shipment
- Mill test cert.Compound batch, extrusion date, dimensions, hydrostatic result
- Dimensional reportOD, wall thickness and ovality sampling per run
- Packing listBundle count, length, net / gross weight, container plan
- OriginCO / Form E / Form R as required by destination


