Export office · Kunming, China Markets · Southeast Asia / CIS / Middle East / Africa
Home
About
Standards
Applications
Quality
Resources
Contact
Request a quote
Home/ Products/ PVC-C / CPVC

PVC-C / CPVC pipe

Chlorinated PVC. The extra chlorine raises the softening point to about 95 °C, which puts hot water, chemical dosing lines and chlor-alkali service inside a thermoplastic pipe instead of outside it.

Size1/2″ – 4″
ScheduleSCH 80 (ASTM F441)
Temperature≤ 95 °C
Length5.8 m / 11.8 m

Overview

PVC-C is PVC-U with roughly two thirds of its hydrogen replaced by chlorine. The bigger, heavier chlorine atom stiffens the chain, so the pipe keeps its strength at temperatures where PVC-U has already gone soft — and it holds up against oxidising chemicals such as sodium hypochlorite that attack ordinary PVC.

It is not a cheaper PVC-U and should not be sold as one. It costs more per metre, is stiffer and more notch-sensitive in cold weather, and needs its own cement. Where it pays: hot service, chlorine, and cable ducting in corrosive ground.

Hot water Chemical dosing Hypochlorite Cable ducting Water treatment
CPVC pipe and duct range

Dimensions — Schedule 80

Sizes we hold production records for. Outside diameter to the ASTM IPS series, wall to Schedule 80. Schedule 40 and 5″–12″ are quoted to order.

CPVC Schedule 80 · 9 sizes · 1/2″–4″
Nominal sizeOutside diameterWall thickness
1/2″21.343.73
3/4″26.673.91
1″33.404.55
1-1/4″42.164.85
1-1/2″48.265.08
2″60.325.54
2-1/2″72.907.01
3″88.907.62
4″114.308.56

Pressure rating of a CPVC line is not a single number: it derates with temperature and with the chemical in the line. Send us the medium, the concentration and the working temperature and we will quote against the derating curve rather than against the 23 °C figure.

PVC-C against PVC-U, where it matters

Property PVC-U PVC-C / CPVC
Continuous service temperatureup to 45 °Cup to 95 °C
Hot water under pressureNot suitableStandard duty
Oxidising chemicals
hypochlorite, chlorine solution
Attacked at strengthPreferred material
Dilute acids & alkalisGoodGood, wider concentration band
Impact at low ambientBrittle below 0 °CBrittle, handles with more care
Solvent cementPVC-U cementCPVC cement — not interchangeable
Relative cost, same size1.0Higher — priced per project

Where it is specified

Hot water & process lines

Plant hot water, tempered process water, CIP and wash-down lines where a metal system would corrode and PVC-U would sag.

Chlorine & hypochlorite dosing

Disinfection dosing skids, sodium hypochlorite storage and transfer — the duty that most often destroys a PVC-U line within a season.

Cable ducting

Power and instrumentation ducts in corrosive soil or at plant boundaries; the orange CPVC duct range sits alongside the pressure pipe.

Water treatment & desalination

Brine, antiscalant and cleaning-chemical lines where both temperature and chemical aggression are present at once.

Jointing & installation

  • Solvent cementCPVC cement and primer only. The joint is chemical weld; cure time before pressure test is longer than for PVC-U, especially at low ambient
  • ThreadedSCH 80 wall takes a thread directly, which is why CPVC is common on small-bore chemical lines and pump connections
  • FlangedStub flange with backing ring at equipment; bolt torque rechecked after the first thermal cycle
  • ExpansionAllow for thermal movement — expansion loops or offsets on long hot runs, and hangers that do not clamp the pipe rigid

Supply basis

Made to order, not ex-stock. PVC-C and CPVC duct are produced on dedicated lines and are quoted per project — sizes, schedule, colour (light grey for pressure, orange for duct) and length. Confirm the medium and temperature before you commit the specification, and expect the lead time to be quoted with the offer rather than held in stock.