Piping systems
built to
hold the line
KHY supplies thermoplastic piping systems for municipal water, building services, irrigation and industrial duty. Full-range diameters, defined pressure classes, and a test record that travels with every shipment.
Pipes · Fittings · Valves
Product system,
organised the way buyers source
PVC leads, because that is where the specification decisions are hardest and where four compounds get confused for one another. PE and PPR follow in their own lanes.
Four PVC compounds.
They are not interchangeable.
One polymer chain, four materials. A line specified in PVC-U and delivered in PVC-M will pass a pressure test and fail a deflection check — the difference sits in the wall, not the bore. This is where most specification errors start, so it is where we start.
Unplasticised
The default for buried water and drainage. Stiffest of the four, lowest cost per metre, and jointing every crew already knows.
- Pressure
- PN 6.3 – 20
- Temp
- ≤ 45 °C
- Best at
- Stiffness · cost
Biaxially oriented
Stretched cold in both directions so the molecules align. 53–60 % thinner wall than PVC-U at the same duty, with the bore and the impact strength that follow from it.
- Pressure
- PN 10 – 25
- Range
- DN 90 – 630
- Temp
- ≤ 45 °C
- Best at
- Flow · impact
Impact modified
Impact modifiers trade a little stiffness for toughness. The pipe that survives rock bedding, rough handling and a trench backfilled in a hurry.
- Pressure
- PN 6.3 – 20
- Temp
- ≤ 45 °C
- Best at
- Toughness
Chlorinated
Extra chlorine lifts the service ceiling to 95 °C and holds off hypochlorite and chlorine solutions that attack ordinary PVC-U.
- Schedule
- SCH 80 · 1/2–4″
- Temp
- ≤ 95 °C
- Best at
- Heat · chemicals
PVC-U and PVC-M ranges are published as produced. PVC-O and PVC-C are supplied to order from specialised lines — confirm availability and pressure class before you commit to a tender specification.

PPR Hot & Cold Water
Random copolymer PP-R for building hot and cold water, heating circuits and compressed air. Fusion-welded, leak-free by construction.

PE 100 Pipe Systems
Buried water mains, irrigation networks and mineral slurry lines. Butt-fusion and electrofusion jointing with full traceability.
Custom Fabrication
One-piece elbows, D-section pipe, large-bore reducers and machined parts to drawing. No tooling cost, single piece minimum.
Four things a pipe buyer
actually checks
Material, checked on arrival
Every compound batch is verified for density, melt flow index, carbon black content and thermal stability before it reaches an extruder.
Dimensional discipline
Wall thickness, ovality and length are measured at fixed intervals along each run and logged against the production batch.
Tested, not assumed
Hydrostatic, drop-impact and Vicat testing to the standard you nominate — with the reports filed in the shipping documents.
Export execution
Neutral or buyer-brand packing, loading plans per container, and documents ready before the vessel closes.
One line from compound
to container
Extrusion, cooling, marking and inspection happen in sequence, so the number printed on the pipe, the number in the test report and the number on the packing list are the same number.
- ExtrusionParallel twin-screw lines with in-line thickness gauging and laser diameter control.
- JointingSolvent cement, rubber ring, butt fusion and electrofusion — fittings matched to the pipe they serve.
- MarkingStandard, size, pressure class, material and batch code printed on every length.
- DocumentsMill test certificate, dimensional report and loading photos issued per shipment.
Where the pipe goes
The same extrusion line serves very different duty points. Each application page will carry the recommended system, pressure class and jointing method for that service.
Municipal water supply
Distribution mains, service connections and pressure networks.
Building services
Hot and cold water risers, heating circuits, compressed air.
Drainage & sewerage
Soil, waste, rainwater and gravity sewer lines.
Agriculture & irrigation
Field networks, drip and sprinkler mains, risers and hydrants.
Industrial service
Chemical transfer, cooling water, effluent and process lines.
Infrastructure & mining
Slurry lines, dewatering, ducting and site services.
Papers that travel
with the pipe
Quality management
Documented control from incoming compound to final inspection, with the mill certificate issued per batch.
Product standard
PVC-U pressure systems for water supply, dimensioned and tested to the nominated standard.
Export compliance
Schedule 40 / 80 dimensional compliance for North American and Gulf specifications.
Third-party testing
Independent batch testing available on request for tender packages.
What buyers ask for first
General catalogue — pipes, fittings, valves
Full range with dimensions, pressure classes and packing data, in one file.
Choosing between PN 10 and PN 16 for buried mains
How surge, burial depth and soil load change the pressure class you should order.
PVC-O added: DN 90–630, PN 10–25
Molecular-oriented PVC — the same pressure rating on a 53–60 % thinner wall.
Send the duty point.
We send the drawing.
Diameter, medium, pressure, temperature, standard and destination port — that is enough for us to come back with a priced proposal and a dimensioned drawing.